<li id="ngvaa"></li>
<rp id="ngvaa"></rp>
<tbody id="ngvaa"></tbody>

<th id="ngvaa"></th>
<dd id="ngvaa"></dd>

    <s id="ngvaa"><mark id="ngvaa"></mark></s>
    <s id="ngvaa"><object id="ngvaa"></object></s>

            <rp id="ngvaa"></rp>

          1. <th id="ngvaa"></th>

            <rp id="ngvaa"></rp>
          2. <span id="ngvaa"><pre id="ngvaa"><sup id="ngvaa"></sup></pre></span>
          3. <s id="ngvaa"><object id="ngvaa"><blockquote id="ngvaa"></blockquote></object></s>
          4. <em id="ngvaa"><acronym id="ngvaa"><input id="ngvaa"></input></acronym></em>
          5. TEL:022-24390723  企业邮箱入口
            产品中心 > 锥齿轮加工机床 > YK2312数控直齿锥齿轮刨齿机

            YK2312数控直齿锥齿轮刨齿机


            YK2312型数控直齿锥齿轮刨齿机天津一机集十年生产刨齿机的专业技术经验而研发成功的又一新作,特别适合小直径、小模数、高精度的直齿锥齿轮的加工?;布庸ぶ背葑冻萋志瓤纱?/span>GB6级。

            本机床使用两把齿轮刨刀进行切齿工作,适用于单件、小批或成批生产??晒┚芤瞧?、仪表等行业的小规格精密直齿锥齿轮加工制造。

            一、机床主要性能和结构特点

            1、本机床为四轴三联动机床。采用伺服电机作为驱动动力源,可实现电子手轮、对刀、调刀。

            2、简化了传统的机械结构,无需更换挂轮减少了机床调整时间,缩短了传动链,不但提高了机床精度,而且使操作更为准确、方便。

            3、本机床标配广州数控控制系统及伺服电机,可根据客户需求使用德国西门子(SIEMENS)或日本发那科(FANUC)数控系统及电机。本机床标配安全防护罩和排屑网盒。

            4、本机床配置独立密封电气柜具有恒温控制装置。

            5、床身内置冷却箱和液压箱。

            二、机床的主要技术规格

             (一)被加工工件尺寸

            最大加工模数

            mm

            2.5

            最大节锥母线长度

            mm

            63

            最大节圆直径(传动比10:1)

            mm

            125

            根锥角最大90°、最小4°

            最大传动比(轴夹角90°时)

            ratio

            10:1

            最大齿高

            mm

            5.5

            齿圈最大宽度

            mm

            20

            加工齿数

            teeth

            5-150

            (二)工件主轴

            主轴锥孔大端直径

            mm

            Φ31.267

            锥度

            ratio

            莫氏四号

            锥长

            mm

            80

            主轴通孔直径

            mm

            Φ20H11

            主轴端面至机床中心的距离

            mm

            30-190

            (三)摇台刀架

            摇台刀架的调整角

            degree

            360°

            摇台刀架的最大摇摆角

            degree

            80°

            刀架座的最大定位角

            degree

            刀具的最大行程

            mm

            28

            刀具的超越行程

            mm

            齿小端3

            齿大端5

            (四)刀具

            GR83-60I型直齿圆锥齿轮刨刀

            刨刀每分钟的往复行程数

            Stroke/min

            250-700

            (五)主机电压

            v

            380

            (六)机床净重

            t

            1.8

            ()机床外廓尺寸

            mm

            1700x1650x1700

             

             



            YK2312 CNC STRAIGHT BEVEL GEAR GENERATOR

            The YK2312 CNC straight bevel gear generator is a newly developed product of Tianjin No.1 Machine Tool Co., Ltd. through its specialized technology and experience in building straight bevel gear generators for nearly 70 years. This machine is especially suitable for cutting high-precision straight bevel gears of small diameters and small modules. The accuracy of the straight bevel gears machined by this machine can reach Grade 6 of the GB Standard.

            The machine cuts gears using two reciprocating cutters and all the single job production, small lot production and batch production are accommodated on this machine. It’s applicable for the manufacturing of small precision straight bevel gears used in the precision instrument and apparatus industries.

             

            I. MACHINE FEATURES

            1. This is a 4-axis CNC machine with 3-axis simultaneous movements. The spindle servo motor is the power source and tool setting and cutter adjustments can be made through the electronic handwheel.

            2. After the conventional mechanical structure is simplified and the transmission chain is shortened, the machine set-up time is reduced as changes of the change gears are not required. This not only increases the machine accuracy but also makes the machine operation more correct and more convenient.

            3. A GSK CNC control system and servo motors are the standard equipment of the machine. A SIEMENS or a FANUC CNC control system and motors can be available on special requests of the customer. A full-enclosure and a chip removal container are the standard equipment.

            4. The machine has a free-standing sealed electrical cabinet equipped with a thermostatic- control device.

            5. A built-in coolant tank and a hydraulic tank are erected on the machine bed.


            II.  SPECIFICATIONS

            1.Dimensions of Work



            Max. module of work

            mm

            2.5

            Max. length of pitch element

            mm

            63

            Max. pitch diameter (ratio 10:1)

            mm

            125

            Root angle  Max.90o & Min.4o



            Extreme ratio  (at 90o shaft angle)

            ratio

            10:1

            Max. tooth depth

            mm

            5.5

            Max. face width

            mm

            20

            Number of teeth

            teeth

            5 -- 150

            2.Work Spindle



            Diameter of taper hole at large end

            mm

            Φ31.267

            Taper

            ratio

            Morse No.4

            Taper length

            mm

            80

            Diameter of through hole

            mm

            Φ20H11

            Distance from face of spindle to machine center

            mm

            30 -- 190

            3.Cutter Head



            Adjusting angle

            degree

            360o

            Max. cradle roll

            degree

            80o

            Max. positioning angle of tool holder

            degree

            8o

            Max. travel of cutter

            mm

            28

            Over run of cutter

            mm

            3 at inner end; 5 at outer end

            4.Cutter



            Type GR83-60I straight bevel gear cutter



            Cutter strokes per minute

            str./min

            250 -- 700

            6.Machine Weight

            t

            1.8

            7.Overall Dimensions

            mm

            1700x1650x1700

                       5.Voltage                   v           380


            下一个: 没有了
            亚洲欧洲2017无码中文,漂亮人妻被夫上司强了,日韩中文无码有码免费视频,午夜18禁试看120秒男女啪啪